Chemical Industry

What Makes an Absorbent Mat Better than Clay?

When washing up spills and leaks you would like it to be as simple as you possibly can so that quick response could be attained. The items you select for offering with liquid spills will figure out how efficiently this could be done. Using an absorbent mat can offer you benefits that are many over some other less reliable products as clay granules that are often seen as a cheaper option. Find out below precisely why mats could be a much better option than clay granules when washing up a liquid spill in your facility:

oil spill and leaks

Absorbent Mat: Why it’s Better than Clay?

1. Easier to handle

A package of absorbent pads is a lot lighter compared to a bag of clay making transportation to a spillage less complicated as well as allowing quick reaction to be accomplished. The typical bag of clay is between 18 to 22 kg making it hard-to-handle and heavy very whereas a package of mats is much lighter and much easier to carry.

Some mat pads are available in handy dispenser containers to ensure that you can quickly take the number of mat pads you have to a spill without holding the entire box. With clay, you will have to carry the whole large bag to the polluted area. In addition, bags of clay have the possibility to rip as you have them to a spillage, this might delay the response time of yours and create much more of a mess throughout the facility of yours.

2. Less messy and much easier to clean up

The highly absorbent fibers in which these pads are made of, make them a lot better compared to clay granules for rapidly absorbing spills and leaks in the facility of yours. Clay granules have absolutely no absorption capability and wind up simply being coated with liquid which seeps through; therefore, they do not actually absorb something and create much more of a mess.

Absorbent mats absorb and retain liquid so there is no possibility for spilt liquids to distribute less and further mess is produced, so general clean up becomes quicker and easier. Clay granules stick to the shoes of yours which means it is able to get tracked all over your office or site in case the area is not blocked off, producing more mess to be cleaned up and a potentially expensive slip as well as a fall hazard.

3. Saves you money and time

You are going to save cash on material and labor expenses in case absorbent mats rather compared to clay granules for leak and spill are used by you clean up in the facility of yours. Mats soak up to 10 times their very own weight – just 5 super absorbent pads are going to do the job of 6.6 kgs of clay, which means you’ll make use of much less and spend much less time cleaning up a spillage.

You will not have to restock supplies almost as you would with clay as you are going to use less material because of their increased absorption capacity. Clean up is a lot easier as they simply have to be picked up and disposed of when completely saturated, unlike messy clay and that takes effort and time more to clean up as there’ll be a lot more substance that has to be swept up and shovelled into pots.

You will find benefits that are many to be acquired by picking mats over granular clay solutions. Spill response is going to be a lot more effective and effective and you’ll help save money and time on spill completely clean up in the facility of yours.

Chemical Spill Kits Melbourne: Getting the Best One for Your Needs

Chemical Spill Kits Melbourne: Getting the Best One for Your Needs

Many would agree that chemical spill kits Melbourne are a lifesaver. But it is very important to get hold of the right one and make the most out of what it can offer. Before you decide to buy one, you need to know first the features that you should be looking for in one for your facility.

When a chemical spill is taken for granted, this can cause a lot of trouble. Cleaning it up immediately is a must, but you need to be sure that you have everything that you need for the clean-up. All you need is a reliable chemical spill kit.

Chemical Spill Kits Melbourne: Choosing the Right One

chemical warning

It is important that you ask yourself some important questions so you would be able to figure out that one that will definitely suit your needs. To be more specific, you need to identify the size of a potential spill, as well as the chemicals involved and the number of places where you can store your spill kits.

How Big is the Spill?

This is the very first thing that you need to ask yourself. You need to know how big or serious is the spill that you will likely encounter. This will be dependent on how large the stores of chemicals are, that are sitting around, or you are making use of. If you happen to have a lot of chemicals, then you need to have large kits. On the other hand, if you are concerned about the amounts of chemicals of leaks, a bucket spill kit will be a big help. This will have everything that will help you clean the spill fast and it is also small enough to be kept in all places for easy access whenever you need it.

What Chemicals are Involved?

This is another important question. In order to get the best results, you should determine the kinds of chemicals that could be involved in the spill. If they differ but are not high in terms of being a hazard, and they will not spill around bodies of water, a universal kit should be at your disposal. Doing so will make you prepared for any eventualities by just using one type of kit.

On the other hand, if the spill will involve oil and hydrocarbon chemicals and you need to separate the oil from water, you need to have an oil-only type of kit. Lastly, if you are dealing with very hazardous chemicals, a hazmat kit is needed.

How Many Kits Do You Need to Get?

For sure you might be wondering how many kits you will be needing. This is dependent on how many places you have where you can handle the chemicals that may spill or leak. Keep in mind that it is a must that you need to act fast. Also, if you have a spill kit on one side of the facility and you need to have it somewhere else, you might be losing valuable time as you need to run just to get it. Thus, you need to do a walk-through and know where you will be needing the kit and be sure to act accordingly. Visit this link to find more reasons why you need to have a spill kit in your facility.

How to Prevent Microbial Growth in Bunded Fuel Tanks?

safe fuel tanks

What are the odds that bunded tanks will harbor microbes and other organisms not seen by the naked eye? There is a big certainty on this.

Bunded fuel tanks and other similar fuel liquid containment systems are more than ideal thriving places for all types of bacteria, both aerobic and anaerobic. Provided, of course, that conditions right inside your tank and the surrounding environment are conducive for them to thrive and grow.

By leaving bacterial growth sitting in your bunded diesel tanks for an extended period of time, it will run the risk of developing dirty muck at the bottom part of your tank. This can grow over time and may even reach your filter and strainer systems, clogging them in the process.

Diesel Microbial Contamination Testing

Aside from this, muck that has been long-seated inside your bunded fuel tank will promote premature corrosion of your tank walls. But the worst part here is that it can spoil your stored fuel, adversely affecting its quality and reliability. 

Ways to Prevent Microbial Growth in Bunded Fuel Tanks

When it comes to dealing with a microbial infestation in bunded fuel tanks, nothing can be more effective in keeping bacterial infestation at bay than by prevention. Keep your fuel tank clean, this is one of the best practices you need to know and by keeping that as a habit, there is a very slim chance for a microbial or fungal infection to occur in your tank.

Prevention of infestation in the bunded fuel tank can be classified in the following: 

a) A fuel monitoring program for the microbes

b) Fuel system maintenance

c) Fuel treatment

Fuel Monitoring

What is involved here is fuel sampling and periodic testing. The working idea here is to mitigate such problems occurring and can be made possible by detecting microbial presence right at its outset. 

Fuel System Maintenance

Water acts as a catalyst for microbial and fungal growth. Therefore, the presence of which can eventually trigger unwanted infestation and by keeping water out of your fuel tank, you are mitigating the chances of bacterial growth. You can do this in a number of ways. Like for instance, you can recycle your fuel via water separations. You can also discharge the water bottoms routinely, this is where microbes are likely to develop first. Another technique you can consider is fuel tank insulation. This procedure will stabilize the temperature of your fuel and by doing so, your fuel will be rendered as inhospitable to microbes and thus prevents them from thriving. 

Fuel Treatment

The most bottom part of fuel and water tanks must be treated. This measure will help control the spread of microbes inside your safe fuel tanks. If the infestation has developed sludge or biomass ( it is that dark and slimy waste product of bacteria), this too must be removed as soon as possible. A high diesel microbial growth remover can help you prevent this scenario from ever happening. 

In choosing a high-grade remover, there are several factors that you need to take into account. 

  1. It should be soluble in your liquid fuel and water.
  2. It is compatible with your system components.
  3. It should be compatible with fuel and other additives
  4. The amount of time the product will take to exterminate the microbes
  5. Regulatory and industry approvals.