Oil & Gas

Where Does Sonic Drill Techniques Fit In?

Most companies involved in the oil drilling and exploration industry tend to have a full comprehension of what sonic drilling is capable of only after getting advised that they should make use of sonic rigs at an alluvial platinum project. Sonic type of drilling would be most ideal to use for this type of drilling work. 

Sonic drilling tends to return excellent soft material recoveries while the drilling through massive boulders in the alluvial profile is still in progress. All holes would be completed without refusal. 

oil drilling

When it comes to the results, it would return 3 times higher when compared to the previous drill sampling. By this measure, it will allow the company to see the real value of its exploration efforts. 

Drilling organisations can utilize sonic drill on a wide spectrum of projects and applications, helping them develop experience and rendering them to understand the possible pros and cons of this drilling system with respect to their drilling projects. 

The primary use of sonic drill is to help in covering sequences. 

But in complete contrast to air core, auger, or RC drilling methods, it is capable of recovering a continuous and intact core sample. Its main niche is to return superior quality samples from mixed materials or unconsolidated near-surface materials.

The sample quality can be coupled with the ability to drill via hard capping rocks such as basalt flows, silcretes, or big boulders. This will return exceptional quality of recoveries from loose sediments that are underlying, which renders them as a kind of ideal for various placer deposits. 

Sonic drilling was highly recommended to be used for an upcoming drill project which will be held in Romania. It will assess dumps that do not only have high-grade tailings and slag, but they also come with other types of rubble and reinforced concrete. Without a doubt, this can be considered as among the best systems of drilling that sampled such a mixed medium.  

Sonic type of drilling will make use of vibration, and carry it out in the drill string sonic wavelength. And as for the drill bit, they are essentially used for penetration, with the driller gearing for maximum resonance or vibration at the bit. The surrounding particles, at this point, are either fractured in hard rock or they would be fluidised in loose materials. 

With respect to depth, a high penetration rate tends to go down, which means to say the RAB or RC tends to become more economical when it is reaching over 30 m depths. Drilling can dry out sonic holes, however, drilling fluids are necessary when working on deeper holes and hard rock units. 

If we should identify one possible or likely drawback for this system, it would be the high relative cost that it usually comes in. It is approximately 3 times higher when compared to the 

RAB cost or about 1 ½ the price of the RC.  

Sonic remains ideal for use in remote areas, despite the cost, and exploration seasons are only short-lived. Penetration rates and excellent recovery are strongly demanded here.

Sonic may not be the readily available answer for every drilling project dilemma out there, but it comes with a strong potential of holding strong results, proving whether a project is feasible or not that are previously seen as unviable.  

Sonic Drilling Techniques for Geotechnical and Environmental Drilling

drill techniquesOver the last two decades, we have seen the increasing, growing trend and public interest in the use of sonic drill methods. We can see two key elements that significantly helped spawn this level of growth now. The first is the development of skilled drill workers whose area of specialization is centered in sonic drilling and the second catalyst is the advancement of drilling technology. 

If a sonic drilling crew operator is highly skilled, there is a good chance that he will reach an impressively high rate of production. Thereby, allowing him to obtain high-grade samples from a wide spectrum of subsurface conditions. The sonic rigs are likely to reach greater depths while trying to keep staying close to 100% of its site core samples.  

Sonic drilling techniques are frequently used in geotechnical, environmental, water drilling, and geo-construction projects, but the industry has also seen further potential when it comes to exploration drilling. Sonic drilling comes with a handful of distinct advantages that are way and above the traditional drill systems that we have come to know. It is because the drill string in this method is not at all obstructed when advancing via unconsolidated overburden formations.  

The Best Time for Using Sonic Drilling Techniques

Knowing the best and the most practical time to use the sonic method of drilling over other traditional systems spells a world of difference when it comes to delivering nothing less but cost-effective results to a client.  

We offer you 3 major points that’ll tell you why you need to take advantage of this type of drilling method. They are as follows:  

Drilling projects where you need to collect a continuous site sample – this is completely contrasting to reverse drilling circulation. This system collects chips, instead. 

In situations that necessitate you to avoid air and fluid while drilling work remains an on-going process. Sonic drilling system eliminates the need for fluid and air. This explains the reason why it is ideal for environmental applications as well as geo-construction and geotechnical drilling projects. 

Drilling projects that primarily involve the environment can enjoy a big amount of savings if it is going to utilize a sonic method of drilling. Projects on drilling of such caliber usually require good funding and work to dispose of investigation-derived waste or the so-called drill cuttings. Dry drilling lowers the amount of liquid waste produced as opposed to rotary systems. 

As for auger drilling, this method can bring about 4 times solid IDW against the sonic system. Leach pad mining projects, the addition of air or water is considered as just a disturbance and will likely induce erosion, paving the way for failure to occur in the form of a partial landslide.

For drilling works that are highlighted by unconsolidated ground formations, the sonic method of drilling is indeed a good and practical drilling option since it can easily handle and manage pebbles and boulders while ensuring borehole integrity remains intact via a continuous and steady casing process.  

Sonic Rig and Tooling Maintenance

See to it that sonic rigs and tooling remain in their optimal operating condition because they are crucial to the long-term productivity of the sonic method of drilling. By observing preventive maintenance, one can easily identify and rectify issues right even before equipment failure starts. When this kind of scenario happens, it will lead to costly downtime. See to it that you have in place a regular maintenance service on your sonic rig. 

Keep Safety in Mind

One of the most crucial aspects of any drill site is safety. We must work in incorporating and promoting a culture of safety inside project/work sites. Drill crews should get used to immersing themselves into critical analysis first before they take action on anything, at least a minimum of 5 minutes before taking any kind of action. By this measure, the crews and staff of drill sites will be able to focus their attention on the current task they have. 

Containment Boom: Using the Appropriate One for A Given Situation

It is a must to be prepared for an oil spill emergency. And for such a situation, you would want to do the best thing and it is to make sure that you have a reliable containment boom on hand. But as there are different types, it might be a challenge to determine which one should be used during a given situation. Here is a handy guide on the different types of settings for possible spills, as well as the kinds of oil booms that are suited for different situations.

Different Types of Containment Boom

There are two main types of oil booms- absorbent and non- absorbent. This article will be focused on non-absorbent type.

Before you decide to buy a containment boom, it is important to figure out first the kind of situation where you would most likely need it. Given that their main purpose is to contain spills and oils in different bodies of water, one of the most important considerations when selecting an oil boom would be the type of body of water where the boom would be needed.

That is because you would need to use very diverse types of oil booms dependent on whether you want to contain a spill in protected and calm waters, or in less calm waters along the shoreline, or can be in fast-moving waters. Below are the four key types of potential situations and the kinds of non-absorbent oil booms that are suited for them.

Calm Water

In this setting, you may have to contain oil and debris. Such type of setting is often found in lakes, inland waterways, harbors, and marinas. The finest type of oil boom for such a setting is compact and lightweight. Preferably, it could also be folded into different sections so it can be transported easily. With this, the boom could be kept in trucks, boats, and other vehicles so it could be deployed faster, and by hand if necessary. The booms need to have handles and anchor points.

oil spill

Calm and Shallow Areas

Examples are roadside ditches, small streams, and canals. For this, you would need a very lightweight boom that could be effortlessly transported and utilized in smaller bodies of water.

Shorelines and Coastal Areas

Such areas are more extensive and the water is not very calm. Also, there might be boat traffic. For this kind of situation, you would need heavy-duty oil booms that come with reliable and sturdier construction. But, you should also be able to move them for boat traffic. You need to look for a high buoyancy reserve. For instance, the type attained by stable log floats. naturally, the booms need to have handles and anchor points. The connectors need to be heavy-duty and marine-grade.

Areas with Faster Currents

This includes rivers, harbors, estuaries, and ports. At the same time, situations where there may be a need for long-term deployment. Such types of circumstances call for booms that have an extremely sturdy structure. Opt for steel cables with sufficient strength for towing. It should not break even in fast-moving water. Preferably, bottom tension is given by galvanized chains.

Establishing and Maintaining Your Onsite Fuel Tanks

The proper maintenance of your onsite fuel tanks will always work to your advantage. It will let you buy huge amounts of fuel, hence, eliminating the need to wait upon your suppliers to drive to your work site.

In addition, it will also help you make a good estimate of how much of your fuel is being consumed and how much it will cost you. However, installation and maintenance of your fuel tanks necessitate that you comply with some local, state, and federal regulations. Another thing that you will be asked to keep an eye on is that you need to keep them free from possible contaminants, including water.  

Some businesses are known to cycle through their required fuel in such a fast-paced manner that it renders bacterial and water buildup not a significant problem to them. Typical of these are the organizations involved in the construction industry.

This is in complete contrast to other companies where these contaminants become a major problem for them. This is one of the many reasons why you must follow proper installation and maintenance procedures all the time.

The Basics of a Dependable Tank Design

The best recommendation we can give to construction fleets in as far as storage tanks are concerned is that they consider the use of above-ground fuel tanks.  The mere fact that you can paint them easily is an advantage point already. 

Painting your fuel tank will significantly help in protecting them from the elements. Besides, it makes your inspection routine pretty easy to carry out.  

Also, painted onsite fuel tanks are less likely to have leaks.  

Above-ground fuel containment systems have their share of drawbacks, too. They are vulnerable to damage, which is likely to happen when vehicles are backing into them. They also attract vandals who are likely to inflict damage to the tank itself in order for them to steal fuel. 

And lastly, these tanks are at great risk when exposed to extreme weather conditions, including flooding and high, strong winds. Therefore, it is safe to say that an above-ground fuel storage tank may or may not be the right tank to have, depending upon your situation.  

Another way to store your liquid fuel is the use of an underground storage tank. These liquid containment systems are linked via a network of piping systems. This type of fuel storage tank is usually taken advantage of by municipalities, fleets, and individuals. Compared to the above-ground type of fuel tanks, they are not very susceptible to damage. 

However, in the absence of proper maintenance, they sure are very prone to leaks. If this happens, the liquid fuel leaking from the tank would eventually bring about the serious environmental damage of unimaginable proportions. This is the underlying reason why the federal government is enforcing stringent regulations on those who happen to have these kinds of tanks. 

Familiarize Yourself with the Laws Concerning Your Storage Tanks

Commit yourself to study your local zoning laws, federal rules and state regulations first before you install an onsite fuel tank. You may want to visit the EPA official website if you want to know and learn more about the regulations and laws concerning fuel tanks.  

storage tanks

Then choose a tank primarily designed for outdoor use. One that comes with an outdoor-use designation and would have been issued by Underwriters Listed.  There is no way you are going to be allowed to use a basement storage container and have it for outdoor use. 

And in any case that your fuel containment tank is designed to contain or hold flammable liquids, it should be fire-guarded or vaulted. This added security feature will help in keeping your contained liquid fuel from igniting for a minimum of 2 hours even if there is fire yonder the tank.  

Finally, getting a refill for your tank regularly would pose a spill risk. Therefore, it is suggested that you limit your fuel tank refill to once a month only.  Should you happen to need more from your fuel supplier, then it necessitates that you have more onsite fuel tanks.  

How to Identify Symptoms of Microbial Contamination in Fuel Tanks?

Paramount to ensuring that your stored liquid fuel will remain in its purest form and on its tip-top shape is to have your fuel tanks inspected or carefully scrutinized by seasoned specialists. Nevertheless, it remains crucial that you also know the various tell-tale signs of diesel tank microbial contamination, which is otherwise known as diesel bug. 

While per annum checks have a crucial role to play in keeping your liquid fuel good, there is no way to tell when some trouble would come to surface due to diesel bug. There are surefire measures that can help you in keeping your diesel fuel quality intact.  

contaminated fuel

How to Tell If You Have Contaminated Diesel Fuel

In keeping microbial contamination in diesel fuel at bay, you must keep an eye on the following primary symptoms. 

  • Water-Oil Contamination
  • Eroded fuel containment tank
  • Engine trouble or problems with your equipment.  

Contamination in the Water-Oil Interface

Water is everywhere, and  so is oil. But even so, contaminated water in the fuel storage tank comes in different levels. This will help us determine the gravity or seriousness of the problem at hand.  

Initially, if there is an affirmative case of water contamination, it would usually present itself as air molecules. And because of that, trying to spot this using your naked eye is impossible. The moment that the water inside your fuel tank has reached its point of saturation, it will become emulsified. If this happens, water droplets will start to form in the soil. This is also one of the reasons why your liquid fuel.

Not submitting your fuel tank for testing by a reputable company runs the risk of puddles of water to appear at the bottom part of the tank. At this stage, there is no way you can possibly determine that there is something wrong with your tank just  by looking at the top of it. 

Water in its flowing form will render bacteria to grow at a much faster rate, this leads to the forming of bugs at the point of microbial infestation.

Eroded Fuel Containment Tank 

An eroded fuel tank — we consider this as among the major symptoms of microbial fuel contamination. This occurs when the level of contamination reached its pinnacle. The bugs that are now thriving inside your fuel containment tank will eventually start eating away the walls of your tank.  

While we are qualifying this as a sure sign of fuel contamination, it will also put the environment in harm’s way. How so? If your fuel storage tank becomes highly corroded, it runs the risk of your fuel to leak and if that happens, the surrounding space is at risk of getting contaminated, too. 

Oil spills can be very damaging to the environment. Environmental clean-up would be costly and often leads to prosecution. 

There is no other better way to avoid this from happening than by ensuring that your fuel tanks are always in their tip-top shape and they are structurally sound all the time.  

Engine Problems

If you are not in the habit of regularly inspecting your fuel containment tank to check how your stored fuel is, then the odds that you will identify contaminated diesel in your tank is very low until the time comes that you will use it, either for your machinery or equipment.  

Chances are high that you will experience engine problems for no apparent reason. Or another scenario is that you will notice that it has degraded from its usual performance and power.  

If something close to this happens to you, the best course of action to take is to have your fuel inspected, checked first by a specialist — identifying if it is causing those issues to your fuel and tank or not. 

Oil Skimmer Types for Large Spills

An oil skimmer is a tool that is used to recover oil spills from the surface of the water. It is considered to be self-propelled and it’s utilized from the shore or controlled from vessels. Given this, there are three types of skimmers and their effectiveness is dependent on an excellent deal upon specific conditions stumped. In case the water is slightly choppy or rough, the skimmer often retrieves more water. Every type of skimmer has benefits and drawbacks, which will depend on the following:

  • The kind of oil recovered.
  • The situation of the ocean during cleanup.
  • The existence of ice or debris within the water.

Oil Skimmer Types

Weir Skimmers

These are skimmers that make use of a dam or an enclosure that is placed at the line of the water and oil. The oil on the side, would spill over in the dam and gets trapped inside. The aim is to catch more oil instead of water. After this, the stuck mixture is then pumped out to a hose or pipe to a tank for disposal or recycling. The skimmers come with a bent to become clogged and jammed by the floating debris.

recycling

Suction Simmers

These are similar to a home vacuum and suck-up oils through broad floating heads. Then, the oil that has been sucked up is being pumped into the storage tanks. The skimmers are efficient, but they, too, could get congested with debris, thus needing consistent observation. Suction skimmers work well on smooth water, where oil has been accumulated against a barrier or boom.

Oleophilic Skimmers – Oil Attracting Skimmers

These types of skimmers make use of disks, long belts, or constant mop chains of oil-attracting materials that blot the oils off the surface of the water. The oil is squeezed out into recovery tanks. Oleophilic skimmers come with the benefit of flexibility that permits them to be utilized on spills that have various thicknesses. Some types, just like the chain or a ‘rope-mop’ skimmer, works well on the water that’s full of ice or debris.

Skimmers may not be taken by a regular manufacturing supply business and need to be requested from a specialty company.

Rope Pom Pom Skimmer

This is an oil-attracting type of skimmer. This was established for recovering thick and oil-based liquid. It also has a lot of strands. The strands are capable of holding oils that are 10 to 50 times their weight, and it works well at below-freezing temperatures. This skimmer is often utilized in oil or water separators, and this is extremely effective in cleaning rocks, stumps, or pilings. In case these pom poms are placed on a rope, then they will be attached to the shore to be used. Such types of skimmers or sweeps are quite cost-effective and are a must-have in open water available for different businesses that retain oil next to a public waterway.

Ultra-Passive Skimmer

This is a singular polymer absorbent sort of oleophilic type skimmer that bonds the oil to the polymer matrix, thus inhibits leaching. It’ll not cause any ponding or clogging with debris. Such type of skimmer is a lot smaller and can float on the surface of the water, thus constantly absorbing oil.

Oil skimmers indeed play a very valuable role in different settings. They are a great investment that yields positive results for everyone.

Top Benefits of Gespasa Pumps Management Software

Petroleum is sometimes referred to as black gold. It is all because when they are extracted, they come in a completely black form. And gold, because just like gold, they are very hard to find. Hence, they have a high monetary value. 

Petroleum is a qualified natural resource. For this reason, the indiscriminate use of which will lead to depletion. Therefore, it is of prime importance for every sector that utilizes petroleum to know what optimum utilization is.

But aside from users, those who sell petroleum ought to know about it also, like petrol and gespasa pump owners. For this purpose, a relevant pump management software can be of significant help here. 

What’s the use of pump management software? This application software can be customized according to your specific needs, but their basic function is to help you in keeping an eye on the proper amount (liters) of fuel received and sold recently. The use of these types of application software is highly recommended because they help in mitigating some of the most feared risks involved in this industry, fuel theft and many other similar fraudulent activities that are usually initiated by some crooks or hooligans. 

gespasa pumps

But of course, a high-quality fuel pump management software can offer so much more in terms of usability and functionality features geared towards further enhancing your fuel business

 1. Reduce Fuel Theft & Fraud

Fraud and fuel theft is a classic issue in the fleet management industry. If you own a fuel refilling station, you know how crucial it is to ensure that your employees are dispensing the correct amount of fuel to your customers and their vehicles. A fuel pump management software in place will help in keeping unauthorized access to your fuel. 

The application software of this kind gives you the liberty to restrict access to your authorized pump operators only, facilitating for you an easy tracking of your fuel consumption. Instances of fuel fraud can be mitigated by keeping an eye on fuel shrinkage and you can do this with the use of a meter reading system.  

2. Inventory Management

The underlying reason behind most cases of fuel loss has something to do with the absence or the lack of inventory management system in place. Whenever there is unloading on the contents of a fuel tanker, it is mandatory to implement a solid and proper record of stock level. This way you are assured that you are making proper payments for what you have received. In addition to that, a pump management software lets you know if the fuel quantity you have on the stock has reached the re-order level. Thus, you can anticipate early on when should replenish your supply.  

3. Report Generation

Petrol pump management software applications intended for use in gespasa pumps can also provide your required automatic report generation with respect to purchasing, stock, sales, customer, or any other search parameters you need to extract for your report. With this kind of software application for your fuel stock management concerns, the usual problem of many with regard to reconciling books with the physical stock will have a proper resolution in no time.  

4. Sales Management

Software applications intended for use in gespasa pump management can also provide substantial help in managing inventory, account management, and sales. By helping you generate recent sales registers and sales reports, you can track your sales effectively.  

5. Going Green

A high-quality fuel pump management software will not elevate your business by further enhancing its level of efficiency but it will also work in favor of the environment by not putting it in harm’s way. Some countries will require you to have a Pollution Under Control certificate. A fuel pump software will be of help in keeping track of the pollution certificate expiry date for all customers.