4 Features That Make Water jet Cutting Perfect For Metal Fabrications

Spread the love

Compared to other cutting processes, waterjet cutting produces cleaner results, better precision, and lower costs while avoiding some of the disadvantages of different methods, such as thermal distortion and rough edges.

Water jet cutter has grown more popular as a cutting process for various tasks throughout the years. This article will assist you in deciding whether or not a waterjet cutting machine is the best option for your subsequent work.

Cold Cutting

Unlike most other cutting methods, waterjet cutting is a cold method. The term “cold cutting” refers to the lack of heat created on the component being cut. The water absorbs the small amount of heat produced.

The heat-affected zone (HAZ) is a region where hot temperatures distort the material, causing chemical and structural alterations resulting in vividly colored bands surrounding the area.

machinery

HAZ can damage and deform components, resulting in a faulty cut that needs additional labor. Because water jet cutting is a cold cutting technique, the material is not heated. Therefore there are no heat-affected zones or thermal deformation.

It Can Cut Almost Any Material

Metals are the most common materials cut by a waterjet. Particularly aluminum because of its softness and can be cut rapidly. Waterjets are capable of cutting a wide range of materials. The two primary materials that waterjets can’t miss are diamonds and tempered glass.

Some modern ceramics are so hard that cutting them isn’t cost-effective. Some composite materials can’t be cut because water can pressurize the in-between layers and cause the fabrics to delaminate.

However, certain composite materials may be easily cut, and there are ways for cutting laminated materials that are incredibly successful.

Additional Finishing Not Needed

laboratory processingIt usually only takes one session with the water jet to get the precise cut you want. Unlike many other cutting processes, no further finishing is generally necessary. It’s ready to take with you after it finishes cutting.

The waterjet’s fineness and precision provide a satin-smooth edge with minimum kerf. Water jets typically has a 0.02” comprehensive stream, resulting in a tight kerf that removes practically minimal material.

If the operator is handling a valuable or hazardous item, this can be pretty useful. Finally, when the kerf width is kept to a minimum, you may save a lot of money and have more material to work with.

Applies to a Wide Range of Industries

The versatility of a waterjet machine’s cutting capabilities makes it beneficial in a broad range of sectors. Waterjet cutting is used in the following industries:

  • Automotive
  • Manufacturing
  • Model Shops/ Rapid Prototyping
  • Aerospace

Choose Your Water Jet Cutting Machine

Your cuts may require varied edge quality depending on what the cut pieces will be intended for. Water jut cutting can make your fabrication project happen.